Duomina – 2 Way Stainless Steel Marker Light / Step Light – 12v Plug & Play

2 Way Marine Grade Stainless Steel Marker Light – 12v
The Duomina is a stainless steel marker light with a 2-way diffuser on the head. This, therefore, creates a diffusion of light over 180º through a clear lens. As a mini-marker light, the Duomina is ideal for access lighting. Install horizontally on and around stairways as an anti-glare step light. Alternatively, mount vertically on paths and decking for use as a low voltage walkover light.

The threaded stainless steel bezel secures to the anodised aluminium body by hand. This makes changing the lamp a very simple task, in addition to maintaining a streamlined design. The anodised aluminium body slots inside ABS sleeving for additional protection with spring clamps holding the fitting securely within the surround. An IP67 water-resistance rating means the Decimina can withstand UK outdoor weather conditions such as rain and strong jets of water, including being temporarily submerged should there be very heavy rainfall.

Once the 55mm diameter mounting hole has been drilled, the stainless steel deck light simply slots into place via the sleeving. Permanently fix the sleeving in position with waterproof sealant for extra sturdy mounting. The mini decking light itself will slide out of the sleeving effortlessly for the purpose of lamp change. Not only can it be used on steps, but this versatile recessed light can also be used on decking, as a recessed path light or wall light.

MR11 12v lamps to be used in the versatile Duomina (LED versions recommended).

Installation
This VERSA plug & play 12v recessed light couldn’t be simpler to install. The robust black plastic sleeve must be built into the wall during construction or retrofitted into a hole. The stainless steel step light pushes into the mounting sleeve where it is held firmly in place. As a result, the streamline front bezel is the only part of the light on show. The 1.5m cable supplied is capped with a 2 pin plug which simply plugs directly into a transformer (or splitter if multiple fittings are installed), the transformer plugs into a mains socket and it is ready to go.

Important Information
The mounting sleeve and additional rubber seal must be installed with this fitting. The Guarantee will be void if the sleeving and seal is not used. Not for use in areas prone to water-logging or flooding.

At Platts Horticulture, we pride ourselves on our high-levels of customer service and good product knowledge and we’re happy to provide help and support throughout the process, from your initial purchase decision right through to after you have purchased your product.

We know that not all our customers are looking for the same products, and that they come to us with different knowledge levels, so we are here and on hand to help. Just drop us and email or give us a call. Nothing is too much trouble!

All products are pre-checked by one of our well-trained team members to ensure all products leave us in perfect condition. While this means that sometimes not all orders will be sent out on same day dispatch, it does mean you’ll be entirely satisfied and ensures peace of mind that you have chosen the right place to buy from. We know sometimes things go wrong, but we do our best to make sure they don’t, and if you have any problems just get in touch with one of our helpful team who will be able to help fix it.

If there’s anything you can’t find or you just need a little bit more help, feel contact us on 01732 867 887. We are open Mon- Fri, 8am-5pm.